IN FRONT OF WALL INSTALLATION SYSTEM ISO‑TOP WINFRAMER „TYPE 1“
Wide range of applications thanks to different system components
In order to do justice to the special demands of cavity wall structures, brick facades and other installation situations which require larger projections, there is a range of different system components available for our in front of wall installation system ISO-TOP WINFRAMER.
ISO-TOP WINFRAMER SYSTEM BRACKET 80 / 80, 90 / 80
Use of the ISO-TOP WINFRAMER SYSTEM BRACKET, 80 resp. 90 mm wide and 80 mm high and adapted to the majority of standard window systems available on the market, is recommended wherever windows are fitted in the direct transition area between the wall and the thermal insulation composite system.
ISO-TOP WINFRAMER SYSTEM BRACKET 140 / 90
With a width of 140 mm and a height of 90 mm, the ISO-TOP WINFRAMER SYSTEM BRACKET 140/90 provides a larger projection. This version is suitable for deeper window profiles or for use with combination products such as roller shutters.
ISO-TOP WINFRAMER SYSTEM BRACKET 160/110, 180/110, 200/110
With a projection of between 160 mm and maximum 200 mm, this system component is suitable for use not only with thicker External Wall Insulation (EWI) systems but also on buildings with cavity wall systems and brick facades. Its large size copes well with the higher loads and thus provides long-term safety.
ISO-TOP WINFRAMER SYSTEM BOARDS
To supplement the system brackets of our in front of wall installation system ISO-TOP WINFRAMER, we also supply system boards in the thicknesses 30/50 mm, 30/60 mm, 30/80 mm, 50/60 mm, 50/80 mm and 50/110 mm, all of which are 1,200 mm long. The boards can be used for partial installation in the External Wall Insulation system and be adapted with the system brackets to achieve a greater overhang. We therefore offer you even more flexibility for your own installation Situation.
SYSTEM ADHESIVE ISO-TOP FLEX-ADHESIVE WF
ISO-TOP FLEX-ADHESIVE WF is a high-quality, neutral cure, single-component, permanently flexible adhesive on a hybrid-polymer basis. It was developed especially for gluing the IN FRONT OF WALL INSTALLATION SYSTEMs ISO-TOP WINFRAMER and makes tension-free structural bonding of the system possible. ISO-TOP FLEX-ADHESIVE WF is also used for sealing and bonding corner connections and can be used on damp surfaces. Refer to the ISO-TOP FLEX-ADHESIVE WF product data sheet for further information.